AC Cbb60 Plastic Case Capacitor Suppliers

Plastic Case CBB60 Capacitors for Single-Phase Motor Duty

Cixi Riyi Capacitor Factory is a direct China manufacturer of AC motor capacitors, and the plastic case group is the moulded-housing branch of our CBB60 range. Each unit is a metallised polypropylene film capacitor sealed in epoxy resin inside a plastic can, so the element and the terminations are protected from moisture, dust and vibration. Its function on the machine is fixed: hold a stable phase shift in the auxiliary winding so a single-phase motor starts under load and continues to run quietly.

Our AC Cbb60 Plastic Case Capacitor Suppliers range is organised by the equipment it serves — cooler motors, general electric motors, water pump motors and washing machine motors — rather than by catalogue number. Capacitance runs from 10 µF to 45 µF, voltage classes reach 500 V, and the termination style is matched to the harness already on your line.

10–45 µFListed capacitance span450 V / 500 VAC working classesS0 & S3Standard and explosion-proof60,000 pcsDaily winding output

Four Use-Based Groups Inside the Range

The plastic case CBB60 types most requested for appliance and pump production fall into four groups. Each group carries the same core construction — low loss, high insulation resistance, good self-healing, impact-current resistance and strong overload capability — and differs in capacitance pair, voltage class and termination.

Cooler Motor Capacitor

A dual 10 + 2.2 µF, C S0, 500 V wire-lead part that puts two capacitance sections in one can. It suits cooler units where the fan section and the compressor section are fed from a single component position.

Electric Motor Capacitor

Lead models at 13 µF B S0 450 V with screw fixing, 30 µF C S0 450 V with screw and terminal block, and 40 µF C S0 450 V. Typical duty covers fans, range hoods and general single-phase drives.

Water Pump Motor Capacitor

Values of 10, 12, 15, 20, 30 and 45 µF, mainly 450 V S0, with 1+1 or 2+2 insert terminals, double white or black leads, sheathed wire or UL1015 line. Oil-resistant 12 µF and 30 µF versions and a 10 µF S3 explosion-proof double white wire type are produced in this group.

Washing Machine Motor Capacitor

Mostly dual models such as 12+5 µF, 15+5 µF, 14+6 µF and 18+7 µF, with mounting calibers of 40 and 50 so the can seats in the existing bracket without tooling changes.

Where a metal housing suits the mounting space better, the same electrical values move into our AC Aluminum Case Cbb60 Capacitor Suppliers group. The full family, including CBB61 and CBB65 types, is listed under CBB60 AC Motor Run And Start Capacitor Manufacturers.

Capacitance Coverage by Application Group

Bar length shows the highest total capacitance we list in that group, against a 50 µF scale.

Cooler motor (dual)10 + 2.2 µF

Water pump motorto 45 µF

Electric motorto 40 µF

Washing machine (dual)18 + 7 µF

Reading a Plastic Case CBB60 Rating

Matching capacitance and voltage to the original part comes first; the termination and caliber decide whether the capacitor drops into the existing bracket and connector.

Representative Models We Build

The list below shows the plastic case build patterns that repeat across pump, appliance and motor programmes; other values follow the same construction route.

• CBB60 13 µF B S0 450 V lead with screw — single section for general electric motors
• CBB60 30 µF C S0 450 V lead with screw and terminal block — motors and pumps with fixed wiring
• CBB60 40 µF C S0 450 V lead — larger single-phase motors
• CBB60 12 µF 450 V S0 C oil resistant and 30 µF 450 V S0 B oil resistant — pump housings exposed to oil mist
• CBB60 20 µF and 30 µF 450 V sheathed wire — pump motors with protected leads
• CBB60 10 µF 450 V S3 explosion-proof C double white wire — pumps requiring the explosion-proof class

Production Base and Quality System

We operate from 25,000 m² of plant and workshops at Cixi, on the south bank of Hangzhou Bay. Eleven automatic slitting machines and fifteen imported automatic winding machines feed the line, and the workshop completes around 60,000 capacitors a day. More than 150 employees work here, including 21 technical personnel and 3 engineers.

25,000 m²Plant and workshops60,000 pcsDaily output15 unitsAutomatic winding machines11 unitsAutomatic slitting machines150+ staff21 technical, 3 engineers

Column heights are normalised for display; each figure is labelled with its own value.

Production runs under our ISO9001 quality management system and ISO14001 environmental management system. The product range holds CQC, TUV, VDE, IMQ, UL and CE certificates, and we release the certificate copies relevant to your order with the technical documents.

Installation, Handling and Service Life

Fit the capacitor so the can sits in its bracket without side load on the leads, and keep terminal faces clean and dry. The epoxy-sealed body needs no orientation, but it does need the ambient and the vibration conditions that match the motor it serves.

• Discharge before any handling or replacement — a run capacitor retains charge after the supply is removed
• Match replacement capacitance and voltage to the original part before fitting
• Keep lead runs short and routed away from hot surfaces and sharp edges
• Check the mounting caliber against the bracket when substituting a can size
• Confirm the part with a capacitance meter after installation and before closing the housing

We supply replacement capacitors by model, and can confirm the same electrical value in a different housing or termination when a machine variant needs it. Packing quantity, marking and carton format are fixed when the order is confirmed; shipments leave from Ningbo by sea, or by air through Ningbo and Shanghai when a delivery is urgent.

Information We Use to Configure Your Solution

A quotation for a plastic case CBB60 part is prepared from the working point of the motor and the physical constraints of the machine, so we ask for the following before we confirm a configuration.

1. Capacitance and section split — single value or dual pair
2. Rated AC voltage and running frequency of the supply
3. Motor type, rated power and start or run duty
4. Termination required — insert terminals, screw fixing, lead length and colour, sheathed wire or UL1015
5. Can size, mounting caliber and the space available in the housing
6. Environmental conditions such as oil mist, humidity or temperature inside the unit
7. Order quantity, packing preference and destination port
8. Drawings, samples or the original part number where a direct replacement is needed

Frequently Asked Questions

What values can you supply in a plastic case CBB60 capacitor?

Single sections from 10 µF to 45 µF, mainly at 450 V, plus the dual 10+2.2 µF 500 V cooler type and washing machine duals of 12+5, 15+5, 14+6 and 18+7 µF. The group also includes oil-resistant 12 µF and 30 µF models and a 10 µF S3 explosion-proof type with double white wire.

Can you produce a capacitor to our drawing or sample?

Yes. Custom products are developed from the drawings or samples you provide, including capacitance, voltage class, can dimensions, lead length and terminal arrangement. We confirm the specification in writing before tooling or production starts.

Are these parts interchangeable with the aluminium case version?

Many capacitors in the CBB60 range are available in both housings, so the same electrical value can be matched to the mounting space and the heat path on your machine. We confirm the replacement dimensions against your drawing before the order is released.

How is quality controlled through the batch?

Production runs under our ISO9001 quality management system with the detection equipment in our workshop, and the product range holds CQC, TUV, VDE, IMQ, UL and CE certificates. Certificate copies and the technical documents that apply to your order are issued with the shipment.

Can you keep supplying the same configuration for later orders?

Yes. Once a specification is agreed and tooled, we hold that configuration for repeat production, so follow-up orders are built to the same capacitance, voltage, termination and mounting caliber. Where a machine variant changes, we reissue the drawing set accordingly. For water pump duties specifically, the dedicated group is listed under AC Cbb60 Water Pump Water Pump Motor Capacitor Manufacturers.